J-VXVP0125 Jobe Vortex PartFill Valve 1.25" Inlet (J-VXVP114).

Description

Listing is for a
J-VXVP0125 Jobe Vortex PartFill Valve 1.25" Inlet (J-VXVP114).
Description
Vortex Part Fill is a high flow valve intended for use in rainwater harvesting tanks. The purpose of the float valve is to automatically maintain a low level of water in the tank during periods of no or low rainfall. This allows services fed by the tank to continue while leaving capacity in the tank for refilling by the next rain.
Applications
Maintaining water levels in:
•
Rainwater harvesting tanks
•
Water cisterns
•
Irrigation and process applications.
Principles of Operation
•
The Valve is installed through the side wall of a storage tank. It should be mounted above the overflow level of the tank to prevent backflow.
•
As the tank empties the weighted float travels down the cord and sits on the bottom stop to activate the valve.
•
The valve will run until the weighted float lifts clear of the bottom stop.
•
The float will then rise as rainwater fills the tank and falls as the tank water is used.
•
The Valve will only function at times when rain fall is insufficient to maintain a water level in the tank above the bottom stop.
Features
•
Ideal for use with all makes and models of rainwater harvesting tanks
•
Compact
•
Constructed from non-corroding materials
•
Valve can be locked in off position using the lock off switch
•
Up to 150mm differential obtainable (dependent on pressure)
•
Valve unscrews from tail for easy Valve Access.
Warranty information
Jobe valves will replace or repair product that fails due to faulty parts or manufacturing for 2 years from dated proof of purchase.  Jobe Valves does not accept any liability whatsoever for any consequential damage caused, or associated costs involved, in the malfunction or in the replacing or repairing of any Jobe product.
Shipping information:
These products are shipped Using UPS ground or USPS Priority.  We will use whichever is priced better at the time of purchase.