-40%

4SCDG50N4 5 HP 4-INCH DISCHARGE BARNES CHOPPER PUMP 143213-MBM SITHE SCDF

$ 3294.23

Availability: 100 in stock
  • Brand: Barnes
  • Rated Power: 5 hp (3.7 kW)
  • LOCKED ROTOR AMPS:: 82.4/92.4
  • Discharge Port Diameter: 4 in
  • CORD P/N:: 125496/125496/125497
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Modified Item: No
  • CORD SIZE:: 12/4 - 18/4
  • Supply Voltage: 208-230/460 V
  • PHASE: 3
  • HERTZ:: 60 Hz
  • RPM:: 1750
  • Condition: New
  • Waste Pump Type: Shredder Pump
  • Horse Power: 5.0
  • Return shipping will be paid by: Buyer
  • FULL LOAD AMPS:: 15.8
  • NEMA START CODE:: J
  • Features: Submersible Chopper Pump
  • Item must be returned within: 30 Days
  • SERVICE FACTOR AMPS:: 18.7
  • DRIVER FRAME:: 18
  • MPN: 4SCDG50N4
  • All returns accepted: Returns Accepted
  • VOLTAGE:: 208-230/460 V
  • SERVICE FACTOR:: 1.2

    Description

    SUBMERSIBLE CHOPPER PUMPS
    (***NOTE: Photo illustration may slightly differ.***
    4SCDF30N4 3 HP 4-INCH DIS BARNES SUBMERSIBLE CHOPPER PUMP 143213-MBM SITHE SCDF
    PART NUMBER:
    143213-MBM
    MODEL NUMBER:
    4SCDG50N4
    SHIP WEIGHT:
    291 (lbs)
    DESCRIPTION:
    Submersible chopper pump designed for raw sewage applications.
    PRODUCT SPECIFICATIONS:
    HP:
    5.0
    VOLTAGE:
    208-230/460
    PH:
    3
    HERTZ:
    60Hz
    RPM (Nom):
    1750
    NEMA START CODE:
    J
    FULL LOAD AMPS:
    15.8
    SERVICE FACTOR:
    1.2
    SERVICE FACTOR AMPS:
    18.7
    LOCKED ROTOR AMPS:
    82.4/92.4
    DRIVER FRAME:
    18
    CORD P/N:
    125496/125496/125497
    CORD SIZE:
    12/4 - 18/4
    DISCHARGE:
    4”, 125 lb. Horizontal Flange Slotted to accommodate 100mm ISO Flanges
    LIQUID TEMPERATURE:
    104°F (40°C) Continuous
    VOLUTE:
    Cast Iron ASTM A-48, Class 30
    STRIKER PLATE:
    440C Stainless Steel Heat Treated to 53-60 HRC Hole Pattern to Accomodate 4" 125 # Flange
    WEAR RING:
    C954 Lead-Free Bronze
    MOTOR HOUSING:
    Cast Iron ASTM A-48, Class 30
    SEAL PLATE:
    Cast Iron ASTM A-48, Class 30
    IMPELLER:
    Design. Enclosed Dual Vane, With Pump Out Vanes on Back Side. Dynamically Balanced ISO G6.3 Material, Ductile Iron ASTM A-536, 65-45-12
    SLICING BLADE:
    440C Stainless Steel Heat Treated to 53-60 HRC
    SHAFT:
    416 Stainless Steel
    “O” RINGS:
    Buna-N
    HARDWARE:
    300 Series Stainless Steel
    LIFTING BAIL:
    300 Series Stainless Steel
    PAINT:
    Axalta™ Corlar® Epoxy, Two Coats
    SEAL:
    Design, Tandem Mechanical, Oil Filled Reservoir. Material: Inboard, Rotating Faces - Carbon Stationary Faces - Ceramic, Material: Outboard, Rotating Faces - Silicon Carbide Stationary Faces - Silicon Carbide Elastomer - Buna-N Hardware - 300 Series Stainless
    CORD ENTRY:
    Custom Molded, Quick Connected for Sealing and Strain Relief
    POWER CORD:
    CSA Certifi ed Submersible Power Cable 2000V - Ordered Separately
    SPEED:
    1750 or 1150 RPM
    UPPER BEARING:
    Design, Single Row, Load, Radial
    LOWER BEARING:
    Design, Double Row, Ball, Oil Lubricated Load, Radial & Thrust
    MOTOR:
    Design, NEMA B Three Phase Torque Curve. Oil-Filled, Squirrel Cage Induction, Inverter Duty rated per NEMA MG1 Insulation, Class H Varnish & Magnet Wire
    THREE PHASE:
    Requires overload protection to be included in control panel.
    MOISTURE SENSOR:
    Normally Open (N/O), Requires Relay in Control Panel
    TEMPERATURE SENSOR:
    Three Normally Closed (N/C). To be wired in series with control circuit.
    OPTIONAL EQUIPMENT:
    White Iron Impeller, Seal Material, Impeller Trims, Cord Length
    MARKINGS:
    CSA
    WEIGHT (MAX):
    291 lbs (131.9 Kg)
    NOISE EMISSION MAX:
    In-Air 73 dB-A
    SUBMERGENCE:
    Max Depth 66ft (20m)
    FREE SHIPPING UPS STANDARD FOR LOWER 48 STATES!
    LOCAL PICK UPS WELCOME